Role of Slurry Additives on Chemical Mechanical Planarization of Silicon Dioxide Film in Colloidal Silica Based Slurry

Abstract

Chemical mechanical planarization (CMP) is a critical process for smoothing and polishing the surfaces of various material layers in semiconductor device fabrication. The applications of silicon dioxide films are shallow trench isolation, an inter-layer dielectric, and emerging technologies such as CMOS Image Sensor. In this study, the effect of various chemical additives on the removal rate of silicon dioxide film using colloidal silica abrasive during CMP was investigated. The polishing results show that the removal rate of silicon dioxide film first increased and then decreased with an increasing concentration of K + , pH, and abrasive size. The removal rate of silicon dioxide film increased linearly as the abrasive concentration increased. The influence mechanisms of various additives on the removal rate of silicon dioxide film were investigated by constructing simple models and scanning electron microscopy. Further, the stable performance of the slurry was achieved due to the COO - chains generated by poly(acrylamide) hydrolysis weaken the attraction between abrasives. High-quality wafer surfaces with low surface roughness were also thus achieved. The desirable and simple ingredient slurry investigated in this study can effectively enhance the planarization performance, for example, material removal rates and wafer surface roughness.