Modelling and experimental analysis of Aero-Engine performance and exhaust emission characteristics Fueled with green fuel blends

Abstract

This study aims to assess the impact of using green fuel in place of biodiesel on the performance and exhaust emissions of air-breathing engines. GasTurb 13 is utilized to forecast the engine's performance (kingTech 180 k turbojet engine). Catalytic deoxygenation of vegetable oils produces green diesel, offering an alternative to biodiesel. Physiochemical properties of GD blends (PME30GD20, PME20GD30, PME10GD10) were analyzed, and GasTurb-13 software predicted engine performance and emissions, validated with experimental data. The results show that GD10PME10 exhibited higher density (767.6 g/m3) than pure green fuel, while viscosity dropped by 53.85 % compared to PME. GD outperformed Jet-A1 by 0.74 % in heating value, with GD10PME10 having the highest at 42.63 MJ/kg. Engine performance measures included thrust, mass fuel flow, thrust-specific fuel consumption, and exhaust gas temperature. GD10PME10 showed a 12.5 % thrust increase and the lowest TSFC (95 g/kN.s) at 80,000 RPM compared to Jet-A1. GD20PME30 achieved the lowest EGT (550 °C) at the same RPM. Regarding emissions, GD20PME30 emitted the lowest CO (100,000 RPM, 150 ppm) and 0.5 % less CO2 (90,000 RPM) than Jet-A1. GD10PME10 produced the lowest NOx (12.5 ppm) at maximum speed, while Jet-A1 emitted the least NOx (7.5 ppm) at 120 k RPM. Overall, the data suggested that green fuel might increase the physiochemical properties of biodiesel blends, hence improving the fuel's capacity to burn more effectively in aero-engines.