Grain size dependence of electrical properties of Gd-doped ceria

32Citations
Citations of this article
33Readers
Mendeley users who have this article in their library.

Abstract

A Gd-doped ceria powder (GDC, Ce0.8Gd0.2O 1.9) prepared from an oxalate precursor was hot-pressed at 1173-1273 K in Ar atmosphere and annealed in air at 1273-1473 K to control the bulk density and grain size. Complex impedance of GDC of the microstructures of 0.29-5.6μm average grain size and 95-98% theoretical density were measured at 573-1073 K in air in the frequency range from 100 Hz to 2 MHz. The bulk conductivity (σi (b)) was independent of the grain size and the activation energy for the migration of oxide ions was 85-88 kJ/mol. The grain boundary conductivity (σii(g)) was far small as compare with σi (b) (σi (g) = 1/40-1/700 of σi (b) at 573 K). The σi, (g) was influenced by the average grain size and showed a minimum value at around 3 μm and gradually increased with decreasing grain size. However, the total conductivity decreased for smaller grain size because of the increased thickness of grain boundary of relatively low conductivity. The information of diffusion of oxide ions from the surface into GDC inside was also reported.

Cite

CITATION STYLE

APA

Hara, A., Hirata, Y., Sameshima, S., Matsunaga, N., & Horita, T. (2008). Grain size dependence of electrical properties of Gd-doped ceria. Journal of the Ceramic Society of Japan, 116(1350), 291–297. https://doi.org/10.2109/jcersj2.116.291

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free