Preparation of Bulk Na2O-BaO-PbO-Nb2O 5-SiO2 glass-ceramic dielectrics for energy storage sources

4Citations
Citations of this article
7Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Bulk Na2O-BaO-PbO-Nb2O5-SiO2 glass-ceramic dielectrics in considerable size (about 200×100×5mm3) were prepared via controlled-crystallization route. The dielectric properties (including the permittivity and the loss tangent) of the bulk dielectrics were investigated. The results show that the capability of charge or energy storage in the bulk dielectrics is relatively lower than that of anticipation based on thinner and smaller specimen, due to the serious breakdown strength (BDS) drop of the bulk dielectrics. Several electrode structures were designed and applied in the measurement circuit to enhance the BDS of the bulk dielectrics. Among which, a bowl-like electrode structure was proved to reduce electrode edge effect most effectively in the BDS measurement. © Published under licence by IOP Publishing Ltd.

Cite

CITATION STYLE

APA

Luo, J., Tang, Q., Zhang, Q., Zhu, J., Han, D., & Du, J. (2011). Preparation of Bulk Na2O-BaO-PbO-Nb2O 5-SiO2 glass-ceramic dielectrics for energy storage sources. In IOP Conference Series: Materials Science and Engineering (Vol. 18). Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/18/20/202024

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free