Abstract
Objective: To analyze efficiency and reliability of 4 modern neonatal ventilators under difficult test conditions. The ventilators tested were: Babylog 8000 (Dräger Medical), BP 2001 (Bear Medical Systems), Sechrist IV 100 B (Sechrist Industries), Infant Star (Infrasonics INC). Measurements and results: Gas flow generation was tested by comparison of preset flow values with no resistance in the circuit to flow values obtained during interposition of a resistance in the inspiratory circuit. A decrease in gas flow was observed when interposition of a resistance in the inspiratory circuit increased peak inspiratory pressure to 60 cmH2O (gas flow decreased by 8% to 24% depending on the ventilator tested). The pressure limiting valve and the positive end-expiratory pressure valve were also evaluated in order to test their behaviour under different flow conditions. Flow-dependence of the pressure was noted for all ventilators except Babylog 8000. Assessment of the reliability of pressure monitoring revealed either 'under' or 'over' estimation of peak inspiratory pressure and positive end-expiratory pressure depending on the ventilator tested. Conclusion: For the best clinical use of mechanical ventilators, neonatologists should be aware of these limitations. Therefore a regular assessment of ventilator performance and monitoring reliability is recommended. © 1995 Springer-Verlag.
Author supplied keywords
Cite
CITATION STYLE
Jouvet, P., Hubert, P., Jarreau, P. H., Lofaso, F., Cloup, M., & Harf, A. (1995). Assessment of neonatal ventilator performances. Intensive Care Medicine, 21(9), 753–758. https://doi.org/10.1007/BF01704743
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.