A silicon-on-insulator-based dual-gain charge-sensitive pixel detector for low-noise X-ray imaging for future astronomical satellite missions

6Citations
Citations of this article
7Readers
Mendeley users who have this article in their library.

Abstract

In this paper, we report on the development of a monolithic active pixel sensor for X-ray imaging using 0.2 µm fully depleted silicon-on-insulator (SOI)-based technology to support next generation astronomical satellite missions. Detail regarding low-noise dual-gain SOI based pixels with a charge sensitive amplifier and pinned depleted diode sensor structure is presented. The proposed multi-well sensor structure underneath the fully-depleted SOI allows the design of a detector with low node capacitance and high charge collection efficiency. Configurations for achieving very high charge-to-voltage conversion gain of 52 µV/e− and 187 µV/e− are demonstrated. Furthermore, in-pixel dual gain selection is used for low-noise and wide dynamic range X-ray energy detection. A technique to improve the noise performance by removing correlated system noise leads to an improvement in the spectroscopic performance of the measured X-ray energy. Taken together, the implemented chip has low dark current (44.8 pA/cm2 at −30°C), improved noise performance (8.5 e− rms for high gain and 11.7 e− rms for low gain), and better energy resolution of 2.89% (171 eV FWHM) at 5.9 keV using55 Fe and 1.67% (234 eV FWHM) at 13.95 keV using241 Am.

Cite

CITATION STYLE

APA

Shrestha, S., Kawahito, S., Kamehama, H., Nakanishi, S., Yasutomi, K., Kagawa, K., … Arai, Y. (2018). A silicon-on-insulator-based dual-gain charge-sensitive pixel detector for low-noise X-ray imaging for future astronomical satellite missions. Sensors (Switzerland), 18(6). https://doi.org/10.3390/s18061789

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free