Metal evaporation flux across Knudsen layer in laser keyhole welding of Al–Mg alloys with pressure balance condition method

Abstract

This study aims to calculate the metal evaporation flux across the Knudsen layer inside the keyhole in laser welding of Al–Mg alloys. The pressure balance at the keyhole wall was analysed and used as the boundary condition in the calculation. Based on the extracted keyhole shape parameters from high-speed images, the surface temperature and gas pressure inside the keyhole were calculated, and the evaporation fluxes for both Al and Mg were acquired. The results show that the front wall of the keyhole absorbs more laser energy than the rear wall. The gas pressure inside the keyhole increases and the evaporation flux decreases with increasing keyhole depth. In addition, the evaporation flux of Mg is much higher than that of the base element Al, which can result in the loss of Mg inside the melt pool. The distribution of the Mg evaporation flux inside the keyhole agrees with the measured Mg loss in the welded section of the Al–Mg alloy. Thus, the calculation method of the metal evaporation flux inside the keyhole can be applied in future simulations of element loss in laser keyhole welding.