Substantiation of Parameters of the Fibrous Material Cleaning Zone

Abstract

The article provides the scheme and principle of operation of the fiber material cleaning section when using multi-faceted cylinder spikes. Theoretically studied the movement of the fibrous mass on the surface of the edge of the cylinder splitting. The numerical solution of the problem substantiates the main recommended values of the parameters of the fibrous material cleaning zone. Full-factor experiments optimized the necessary system parameters. The article also investigates the influence of the annular cylinder parameters on the cleaning efficiency of the machine based on full factorial experiments. In this case, the following ring cylinder parameters are optimized: the number of revolutions is 455 rpm, the number of faces of the multifaceted spiky is 6, and the gap between the cylinder and the mesh surface is 16 mm.