Abstract
In this work, a beat-frequency encoded fiber laser hydrophone is developed for high-resolution acoustic detection by using an elastic corrugated diaphragm. The diaphragm is center-supported by the fiber. Incident acoustic waves deform the diaphragm and induce a concentrated lateral load on the laser cavity. The acoustically induced perturbation changes local optical phases and frequency-modulates the radio-frequency beat signal between two orthogonal lasing modes of the cavity. Theoretical analysis reveals that a higher corrugation-depth/thickness ratio or larger diaphragm area can provide higher transduction efficiency. The experimentally achieved average sensitivity in beat-frequency variation is 185.7 kHz/Pa over a bandwidth of 1 kHz. The detection capability can be enhanced by shortening the cavity length to enhance the signal-to-noise ratio. The minimum detectable acoustic pressure reaches 74 µPa/Hz1/2 at 1 kHz, which is comparable to the zeroth order sea noise.
Author supplied keywords
Cite
CITATION STYLE
Yang, W. Z., Jin, L., Liang, Y. Z., Ma, J., & Guan, B. O. (2017). Corrugated-diaphragm based fiber laser hydrophone with sub-100 µPa/Hz1/2 resolution. Sensors (Switzerland), 17(6). https://doi.org/10.3390/s17061219
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.