Physical–Mechanical Properties of Innovative Biobased Particleboards for Application in External Building Façades

Abstract

Human activities undoubtedly increase greenhouse gases (GHG), negatively influencing global climate change. The building and construction sector uses at least 40% of the total energy consumption and produces the same percentage of GHG emissions. Therefore, the development of sustainable building materials is a crucial key factor for environmental protection. The study contributes to the development of bio-based façade materials using available raw biomass like wheat straw, grey alder, and softwood (a mix of spruce and pine), to promote reduced emissions of CO2. Two technologies were used to produce high-density particleboards based on (1) steam explosion treatment and (2) the addition of bio-based suberinic acids as a binder. In addition to the biomass species and board type, the influence of conventional and mold hot-pressing was investigated on produced board properties: density, thickness swelling, modules of rupture and elasticity in bending, and internal bonding. The obtained particleboards demonstrate significant differences in terms of the tested properties depending on all variable factors. The best performance, in terms of physical–mechanical properties, was achieved by the conventionally hot-pressed board of steam-exploded grey alder particles, being influenced by the highest density (1380 kg/m3). Mold hot-pressing in most cases resulted in decreased performance of obtained boards.