Developing a small photovoltaic power supply system with adaptive technologies for rural Africa: Design, cost and efficiency analyses

Abstract

The objective of this study was to design a small-scale photovoltaic system to support electricity sup-ply to a rural village in the Republic of Congo. A simple impedance-matching system and an innova-tive panel-tilting system were implemented as adap-tive technologies to increase the power output of the system and reduce its capital and running costs. The experimentally obtained results showed that the daily energy output of a four-panel, 400 W photo-voltaic system could be increased by 15% through a series parallel impedance match configuration, and by 36% from 3.3 kWh per day to approximately 4.5 kWh per day through implementing an automated panel tilting system with always normal incidence of solar irradiation on the panels in an equatorial envi-ronment. Implementing these technologies accord-ingly reduced the cost of energy supplied by the same percentages, with an eventual electricity cost of about ZAR 3.60 per kWhr, as calculated over an operation time of ten years, and an initial capital out-lay of ZAR 37 per watt. These costs are much lower than for installing power grid lines to the village, and the technology also ensures complete autonomy of power supply to the community. The study also identified the potential to generate many new busi-ness and job opportunities locally in this community, as well as in the rest of Africa.