Using fatigue characteristics to analyse test results for 16Mo3 steel under tension-compression and oscillatory bending conditions

Abstract

In this study, 16Mo3 steel was analysed for fatigue tests under tension-compression and oscillatory bending conditions. The analysis involved a comparison of fatigue test results obtained using the Manson-Coffin-Basquin, Langer and Kandil models and the models proposed by Kurek-Lagoda. It was observed that it is possible to substitute the basic tension-compression test performed in large testing machines with oscillatory bending tests carried out on a simple, modern test stand. The tests were performed under oscillatory bending on a prototype machine. The testing of 16Mo3 steel proved that the best-known Mason-Coffin-Basquin fatigue characteristic describes the results of all of the experimental tests very well, but the model can only be used when it is possible to divide strains into elastic and plastic components. It should be emphasised here that there is no such possibility in the case of tests performed under oscillatory bending conditions. It was proven that the proposed test method can substitute the tension-compression test very well and be a much more cost efficient way to obtain LCF material fatigue properties.