Diode behavior in ultra-thin low temperature ALD grown zinc-oxide on silicon

37Citations
Citations of this article
34Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

A thin-film ZnO(n)/Si(p+) heterojunction diode is demonstrated. The thin film ZnO layer is deposited by Atomic Layer Deposition (ALD) at different temperatures on a p-type silicon substrate. Atomic force microscopy (AFM) AC-in-Air method in addition to conductive AFM (CAFM) were used for the characterization of ZnO layer and to measure the current-voltage characteristics. Forward and reverse bias n-p diode behavior with good rectification properties is achieved. The diode with ZnO grown at 80°C exhibited the highest on/off ratio with a turn-on voltage (VON) ∼3.5 V. The measured breakdown voltage (VBR) and electric field (EBR) for this diode are 5.4 V and 3.86 MV/cm, respectively. © 2013 © 2013 Author(s).

Cite

CITATION STYLE

APA

El-Atab, N., Alqatari, S., Oruc, F. B., Souier, T., Chiesa, M., Okyay, A. K., & Nayfeh, A. (2013). Diode behavior in ultra-thin low temperature ALD grown zinc-oxide on silicon. AIP Advances, 3(10). https://doi.org/10.1063/1.4826583

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free