Microstructure and mechanical properties of the annealed 6060 aluminium alloy processed by ECAP method

Abstract

Purpose: The main goal of this paper is to present the investigation results of microstructural evolution and mechanical properties changes in commercial EN AW 6060) aluminium alloy after intensive plastic deformation, obtained by equal channel angular pressing (ECAP) techniques in an annealed state. Design/methodology/approach: Annealing heat treatment was used to remove various types of internal stress in a commercially available alloy in order to increase workability of the material. The evolution of its properties and material behaviour was evaluated after 2,4,6,and 8 passes of the ECAP process. Findings: It was found that the mechanical properties and microstructure during intensive plastic deformation, such as that during the ECAP process, were changed. Plastic deformation refined grains in the aluminium alloy and increased its mechanical properties. Research limitations/implications: The presented study shows results of the investigated material in an annealed state. Practical implications: The applied processing route allows development of materials characterized by high strength and ultrafine grain microstructure compared to un-deformed annealed aluminium alloy. Originality/value: The work presents data about the influence of intensive plastic deformation on the microstructure and mechanical properties of 6060 aluminium alloy after annealing.