Tuneable mechanical performance and reusability of 4D-printed heterogeneous metamaterials using shape memory biomass-derived polymer

Abstract

Herein, hybrid triply periodic minimal surfaces (TPMS) metamaterials were structurally designed and additively manufactured via 4D printing using a biomass-derived shape memory polymer. Two TPMS topologies including gyroid and diamond with homogeneous and graded structures were separately generated by adjusting the C parameter. The mechanical performance and deformation behaviour between the uniform and graded structures were compared, and the compressive shaping-recovery cycles were conducted. The results showed that the gyroid (C:0.7→0.4) and diamond (C:0.7→0.4) samples exhibited superior reusability to the uniform counterparts. Subsequently, heterogeneous metamaterials assembled by gyroid and diamond subsections were established and 4D-printed. It was observed that both the yielding and shape recovery were preferred occurring in the gyroid part, while the diamond subsection played a stronger supporting effect. Therefore, the compressive performance and deformation mode could be feasibly tuned by the hybridisation of TPMS, which broadened the functional and sustainable applications in energy absorption, intelligent protection and medical implants.