Optimization of pollutants removal from anaerobically digested dairy wastewater by electro-oxidation process: a response surface methodology modeling and validation

Abstract

The release of anaerobically digested dairy wastewater (ANDDW) without a treatment can lead to severe environmental pollution, prompting the exploration of effective and sustainable treatment methods. Amidst various wastewater treatment approaches, the electro-oxidation (EO) process is considered as a promising, clean, and adaptable solution. In this study, the major operational parameters viz. current density, electrolyte concentration, treatment time, and mixing speed of an EO comprising Ti/PbO2 anode and stainless-steel cathode, were optimized using response surface methodology (RSM) for efficient removal of chemical oxygen demand (COD), ammonia nitrogen (NH3-N), total phosphorus (TP), orthophosphate (OP), total nitrogen (TN), and total Kjeldahl nitrogen (TKN) from ANDDW. Optimal conditions were identified as a current density of 90 mA cm−2, 0.08% electrolyte concentration, 180 min treatment time, and 400 rpm mixing speed. Under the optimum conditions, the COD, NH3-N, TP, OP, TN, and TKN removal efficiencies were 78.36, 63.93, 87.41, 92.39, 67.01, and 81.42%, respectively. Furthermore, the reaction rate followed the first-order kinetic model for the pollutants removal with correlation coefficients (R2) close to 1. The findings highlight the potential of using the EO process to treat high pollutant-laden ANDDW and encourage further studies to confirm the corresponding outcomes on a pilot scale. Graphical abstract: (Figure presented.)