Effect of aluminum content on plasma-nitrided AlxCoCrCuFeNi high-entropy alloys

Abstract

High-entropy alloys (HEAs) AlxCoCrCuFeNi with different aluminum contents (x = 0 to 1.8) were plasma nitrided at 525 °C for 45 hours with an aim to develop wear-resistant structural parts. The nitrided layer comprises a well-nitrided dendrite phase and an un-nitrided Cu-rich interdendrite phase. Surface hardening is a result of the formation of various nitrides in the nitrided dendrite: CrN, Fe4N, and AlN. With increasing aluminum content, the hardness of the nitrided layer increases due to the increased amount of hard AlN phase and the increased volume fraction of bcc phase being harder than the fcc one. The nitrided layer thickness shows an apparent decrease with the increasing aluminum content of the alloy. The present alloy system provides a wide range of substrate hardness from Hv 170 to 560 before nitriding, which even becomes harder by around Hv 30 after nitriding. For Al0.5CoCrCuFeNi alloy having the highest surface hardness of Hv 1300, a layer thickness of 23 μm, and a substrate hardness of Hv 300, an adhesive wear test confirms its superior wear resistance as being 17 times that of the un-nitrided samples. © The Minerals, Metals & Materials Society and ASM International 2009.