Growth of semi-polar (1013) aln film on m-plane sapphire with high-temperature nitridation by hvpe

Abstract

Aluminum nitride (AlN) films were grown on the m-plane sapphire by high-temperature hydride vapor phase epitaxy (HVPE). The effect of high-temperature nitridation on the quality of AlN film was studied. The high-temperature nitridation is favorable for the formation of semi-polar single (103) orientation AlN film, the quality of which shows strong dependence on the nitridation temperature. The full width at half maximum of X-ray diffraction for (103) AlN film was only 0.343° at the optimum nitridation temperature of 1300 °C. It is found that the nano-holes were formed on the surface of substrates by the decomposition of sapphire in the process of high-temperature nitridation, which is closely related to the quality improvement of AlN. At the critical nitridation temperature of 1300 °C, the average size of the nano-holes is about 70 nm, which is in favor of promoting the rapid coalescence of AlN micro-grains in the early stages. However, the size of nano-holes will be enlarged with the further increase of nitridation temperature, which begins to play a negative role in the coalescence of AlN grains. As a result, the grain size will be increased and extended to the epilayer, leading to the deterioration of the AlN film.