Rehabilitation of reinforced concrete deep beams by near-surface-mounted steel reinforcement

Abstract

This article describes an experimental investigation of the behavior of reinforced concrete deep beams repaired by near-surface-mounted (NSM) steel bars. The first beam was loaded under a two-point load up to failure, and the other six deep beams were loaded to 0.4 and 0.75 of ultimate load. Then, they were repaired by NSM steel bars. The bar orientation and angle were the main variables in these beams. The primary goal of this study is to determine whether it is possible to restore the reinforced concrete deep beam with shear reinforcement to its full load-carrying capacity by NSM steel bars as the method of repair. All deep beams were tested with a shear span-depth ratio of 0.8. The test findings showed that the NSM steel repair bars were very effective in restoring the loaded deep beams' full capacity. Moreover, NSM steel bars enhanced the original deep beams' strength capacity from 4.16 to 19.44%. The ultimate load, mechanisms of failure, load-crack width distribution, and load-deflection profile are tracked as results.