Implementasi Jaringan Sensor Nirkabel Zigbee Menggunakan Topologi Mesh Pada Pemantauan Dan Kendali Perangkat Ruang

Abstract

The monitoring and control system has the function of recording data and accessing the installed room equipment. The communication used is ZigBee wireless communication with mesh topology. The coordinator is a data center connected directly to the computer, and the results are displayed in the form of HMI, so that an operator can easily monitor and control the devices installed in the room. The room equipment consists of sensors such as PIR, current, smoke detector and fingerprint, all of which are connected to the arduino that serves as data processors in the form of protocols to be sent from the end device point to the coordinator. The result of test, delivery distance between ZigBee installation point is 93 meters away without obstruction and 30 meter with obstacle. The data transmission throughput from the end device and simulator to the coordinator point will be greater if the delay is reduced and the data packet enlarged in each delivery. The result of packet loss in the test is 4.94%, this is due to floating factor. Keywords