Anomalous Hall effect in InSb layers grown by metalorganic chemical vapor deposition on GaAs substrates

45Citations
Citations of this article
20Readers
Mendeley users who have this article in their library.
Get full text

Abstract

InSb epitaxial layers have been grown on GaAs substrates by low-pressure metalorganic chemical vapor deposition. A 3.15-μm-thick film yielded an x-ray full width at half maximum of 171 arcsec. A Hall mobility of 76 200 cm 2/V s at 240 K and a full width at half maximum of 174 arcsec have been measured for a 4.85-μm-thick epilayer. Measured Hall data have shown anomalous behavior. A decrease in Hall mobility with decreasing temperature has been observed and room-temperature Hall mobility has increased with thickness. In order to explain the anomalous Hall data, and the thickness dependence of the measured parameters, the Hall coefficient and Hall mobility have been simulated using a three-layer model including a surface layer, a bulklike layer, and an interface layer with a high density of defects. Theoretical analysis has shown that anomalous behavior can be attributed to donorlike defects caused by the large lattice mismatch and to a surface layer which dominates the transport in the material at low temperatures.

Cite

CITATION STYLE

APA

Besikci, C., Choi, Y. H., Sudharsanan, R., & Razeghi, M. (1993). Anomalous Hall effect in InSb layers grown by metalorganic chemical vapor deposition on GaAs substrates. Journal of Applied Physics, 73(10), 5009–5013. https://doi.org/10.1063/1.353821

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free