In situ measurement of the water vapor 18O/16O isotope ratio for atmospheric and ecological applications

Abstract

In this paper a system for in situ measurement of H216O/ H218O in air based on tunable diode laser (TDL) absorption spectroscopy is described. Laboratory tests showed that its 60-min precision (one standard deviation) was 0.21‰ at a water vapor volume mixing ratio of 2.67 mmol mol-1 (dewpoint temperature -10.8°C at sea level) and improved to 0.09 at 15.3 mmol mol-1 (dewpoint temperature 13.4°C). The TDL measurement of the vapor generated by a dewpoint generator differed from the equilibrium prediction by -0.11 ± 0.43‰ (mean ± one standard deviation). Its measurement of the ambient water vapor differed from the cold-trap/mass spectrometer method by -0.36 ± 1.43‰. The larger noise of the latter comparison was caused primarily by the difficulty in extracting vapor from air without altering its isotope content. In a 1-week test in Logan, Utah, in August 2003, the isotope ratio of water vapor in ambient air was positively correlated with the water vapor mixing ratio and also responded to wetting events (rain and irrigation) in an expected manner. This system has been in continuous o peration in New Haven, Connecticut, since December 2003. It is suggested that such uninterrupted measurement may open a new window on the hydrologic cycle, particularly processes involving phase changes of water, and can increase the power of the isotope method in ecological applications. © 2005 American Meteorological Society.