Evaluation of microstructures and mechanical properties of Sn-10Sb-Ni lead-free solder alloys with small amount of Ni using miniature size specimens

Abstract

Sn-Sb-Ni solder alloy is expected to be used as a die-attach material for a next-generation power semi conductors in power module. The aim of this paper is to investigate the effects of the Ni content on microstructures, tensile, and fatigue properties of Sn-10Sb-xNi (x = 0.05, 0.10, 0.25, 0.50) (mass%) lead-free solder alloys using miniature size specimens. The Sn-10Sb-Ni solder alloys have the microstructure in which Sb-Sn and Ni-Sb compounds are dispersed in the β-Sn matrix. As the Sb and Ni content increases, Sb-Sn and Ni-Sb compounds are coarsened, respectively. The effect of the Ni content on tensile properties of the alloy is slight at 25 °C. At 150 °C and 200 °C, 0.1% proof stress and tensile strength increase gradually with the Ni content increases, and saturate at the Ni amount over 0.25 mass%. According to the fatigue test at 200 °C, the fatigue properties of Sn-10Sb-Ni with 0.10–0.25 mass% Ni are better than that of the Sn-10Sb. From the experimental results, Sn-10Sb-Ni with 0.10–0.25 mass% Ni have superior mechanical properties.