An Experimental Investigation of the Effect of Pressure and Salinity on IFT in Live Oil/Brine Systems

Abstract

Residual oil saturation in reservoirs is primarily influenced by viscous and capillary forces, with interfacial tension (IFT) being a critical factor in fluid distribution due to capillary pressure. Adjusting IFT is essential for enhancing oil recovery, particularly in waterflooding, which is the most common secondary recovery technique after primary production. The salinity of injected water directly affects the IFT between crude oil and brine, making it a crucial factor in optimizing recovery. However, limited studies have examined IFT using live oil samples under actual reservoir conditions. In this study, a high-pressure, high-temperature (HPHT) drop shape analyzer was used to measure the IFT between live oil and brine under reservoir conditions. Five live oil samples and two sodium chloride (NaCl) brine concentrations (30,000 and 100,000 ppm) were tested at a reservoir temperature of 180 °F. Measurements were conducted above the bubble points of the oils, replicating undersaturated reservoir conditions. The results revealed that the impact of pressure on IFT was more complex than that of salinity. IFT generally decreased with increasing pressure but showed mixed behavior across different samples. Conversely, IFT consistently increased with higher salinity. These findings enhance the understanding of IFT behavior under reservoir conditions, supporting improved reservoir simulations and oil recovery strategies.