Performance of silver, zinc, and iron nanoparticles-doped cotton filters against airborne E. coli to minimize bioaerosol exposure

Abstract

To overcome limitations of existing air-cleaning filters in capturing and deactivating aerosolized microorganisms, this study was embarked to evaluate novel Ag, Zn, and Fe nanoparticle-doped cotton filters (AgCt, ZnCt, FeCt), as biocidal filters for bioaerosol attenuation. To evaluate the biocidal activity of the nanocomposite filters, the survival of lab-generated E. coli after collection on each filter material was compared to collection on an undoped cotton control filter and in a BioSampler. Relative humidity (RH) affected the survival of bacteria on the filters, and the optimal RH was found to be 50 ± 5%. The physical removal efficiency (PRE) determined by an optical particle counter was 99.9 ± 0.7% for ZnCt, 97.4 ± 1.2% for AgCt, and 97.3 ± 0.6% for FeCt, where the control showed only 77.4 ± 6.3% for particles > 500 nm. The doped filters showed 100% viable removal efficiency (VRE). Importantly, the VRE of the nanocomposite filters after four cycles remained nearly 99% and was greater than the cotton control filter at 76.6 ± 3.2%. Adding to its benefits, the AgCt filters had a lower pressure drop than the FeCt and ZnCt filters and the cotton control. The permeability for the cotton control filter was 3.38 × 10−11 m2 while that for the AgCt filter was slightly higher (3.64 × 10−11 m2) than the other filters as well. Overall, these results suggest that nanocomposite-doped filter media, particularly AgCt, can provide effective protection against airborne pathogens with a lower pressure drop, elevated collection efficiency, and better disinfection capability as compared to untreated cotton filters, which are all important features for practical biocidal applications. [Figure not available: see fulltext.].