Co solubility in Sn and interfacial reactions in Sn-Co/Ni couples

30Citations
Citations of this article
14Readers
Mendeley users who have this article in their library.
Get full text

Abstract

It has been reported that minute Co additions to Sn-based solders are very effective for reducing undercooling, probably due to low Co solubility in Sn. In this study, Co solubility in molten Sn was determined experimentally. According to results of metallographic analysis, Co solubility in molten Sn is as low as 0.04 wt.% at 250°C. Interfacial reactions in Sn-Co/Ni couples at 250°C were examined for Co contents from 0.01 wt.% to 0.4 wt.%. The Ni 3Sn 4 phase was the only interfacial reaction phase in almost the entire Sn-0.01 wt.%Co/Ni couple. For Sn-Co/Ni couples with a Co content higher than 0.01 wt.%, a thin, continuous Ni 3Sn 4 layer and a discontinuous decahedron (Ni,Co)Sn 4 phase were formed in the initial stage of reaction. The reaction products evolved with time. With longer reaction time, the Sn content in the decahedron (Ni,Co)Sn 4 phase decreased, and the (Ni,Co)Sn 4 phase transformed into the (Ni,Co)Sn 2 phase and cleaved into a sheet, which then detached from the interface, after which Ni 3Sn 4 began to grow significantly with longer reaction times. © 2010 TMS.

Cite

CITATION STYLE

APA

Chen, S. W., Chen, Y. K., Wu, H. J., Huang, Y. C., & Chen, C. M. (2010). Co solubility in Sn and interfacial reactions in Sn-Co/Ni couples. Journal of Electronic Materials, 39(11), 2418–2428. https://doi.org/10.1007/s11664-010-1337-7

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free