Fabrication of a 77GHz Rotman lens on a high resistivity silicon wafer using lift-off process

Abstract

Fabrication of a high resistivity silicon based microstrip Rotman lens using a lift-off process has been presented. The lens features 3 beam ports, 5 array ports, 16 dummy ports, and beam steering angles of ±10 degrees. The lens was fabricated on a 200 μm thick high resistivity silicon wafer and has a footprint area of 19.7mm x 15.6 mm. The lens was tested as an integral part of a 77GHz radar where a tunable X band source along with an 8 times multiplier was used as the RF source and the resulting millimeter wave signal centered at 77GHz was radiated through a lens-antenna combination. A horn antenna with a downconverter harmonic mixer was used to receive the radiated signal and display the received signal in an Advantest R3271A spectrum analyzer.The superimposed transmit and receive signal in the spectrum analyzer showed the proper radar operation confirming the Rotman lens design. Copyright © 2014 A. Attaran and S. Chowdhury.