PP/TiO2 melt-blown membranes for oil/water separation and photocatalysis: Manufacturing techniques and property evaluations

Abstract

This study aims to produce polypropylene (PP)/titanium dioxide (TiO2) melt-blown membranes for oil/water separation and photocatalysis. PP and different contents of TiO2 are melt-blended to prepare master batches using a single screw extruder. The master batches are then fabricated into PP/TiO2 melt-blown membranes. The thermal properties of the master batches are analyzed using differential scanning calorimetry and thermogravimetric analysis, and their particle dispersion and melt-blown membrane morphology are evaluated by scanning electron microscopy. TiO2 loaded on melt-blown membranes is confirmed by X-ray diffraction (XRD). The oil/water separation ability of the melt-blown membranes is evaluated to examine the influence of TiO2 content. Results show that the thermal stability and photocatalytic effect of the membranes increase with TiO2 content. TiO2 shows a good dispersion in the PP membranes. After 3 wt.% TiO2 addition, crystallinity increases by 6.4%, thermal decomposition temperature increases by 25 °C compared with pure PP membranes. The resultant PP/TiO2 melt-blown membrane has a good morphology, and better hydrophobicity even in acetone solution or 6 h ultraviolet irradiation, and a high oil flux of about 15,000 L·m-2·h-1. Moreover, the membranes have stabilized oil/water separation efficiency after being repeatedly used. The proposed melt-blown membranes are suitable for mass production for separating oil from water in massively industrial dyeing wastewater.