Thickness dependence of optoelectrical properties of Mo-doped in 2 O 3 films deposited on polyethersulfone substrates by ion-beam-assisted evaporation

5Citations
Citations of this article
8Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Indium molybdenum oxide (IMO) films were deposited onto the polyethersulfone (PES) substrates by ion-beam-assisted evaporation (IBAE) deposition at low temperature in this study. The effects of film thickness on their optical and electrical properties were investigated. The results show that the deposited IMO films exhibit a preferred orientation of B(222). The electrical resistivity of the deposited film initially reduces then subsequently increases with film thickness. The IMO film with the lowest resistivity of 7.61 10(4)ohm-cm has been achieved when the film thickness is 120nm. It exhibits a satisfactory surface roughness R pv of 8.75nm and an average visible transmittance of 78.7. Copyright © 2010 Chin-Chiuan Kuo et al.

Cite

CITATION STYLE

APA

Kuo, C. C., Liu, C. C., Jeng, Y. F., Lin, C. C., Liou, Y. Y., & He, J. L. (2010). Thickness dependence of optoelectrical properties of Mo-doped in 2 O 3 films deposited on polyethersulfone substrates by ion-beam-assisted evaporation. Journal of Nanomaterials, 2010. https://doi.org/10.1155/2010/840316

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free