Multiobjective Optimization of Cutting Parameters for TA10 Alloy Deep-Hole Drilling

Abstract

In order to obtain better quality TA10 pipes, the Boring and Trepanning Association (BTA) deep-hole drilling process is used. However, this type of machining leads to difficult chip removal, tool wear, and poor hole-surface quality. In this study, a deep-hole drilling experiment was conducted on TA10 workpieces using the designed tool with different process parameters, and the process parameters were optimized by machining results with multiple objectives such as chip morphologies, tool wear, hole-axis deflection, and hole surface roughness. The results show that different process parameters have a great impact on the cutting process, with a higher feed resulting in smoother chip removal and a lower spindle speed resulting in lighter tool wear and less hole axis deflection. When the spindle speed is 145 r/min and the feed is 0.12 mm/r, the machined TA10 pipe meets both the accuracy requirement of roughness and the machining efficiency.