RILEM TC190-SBJ: Development of recommendations on novel durability test methods for wet-applied curtain-wall sealants

Abstract

The paper discusses the work carried out over the past 7 years within RILEM Technical Committee 190-SBJ Service Life Prediction of Sealed Building and Construction Joints towards the development of RILEM Technical Recommendations (RTR) on durability test methods for wet-applied (gun-grade) curtain-wall sealants. This paper is published along with the two draft RTR methods to provide some insight into the discussions within the committee during the development and early evaluation of both methods. The two draft RTR methods define test and evaluation protocols for accelerated artificial weathering and natural outdoor weathering. Both draft RTR methods are based on a novel test specimen configuration that allows simultaneous exposure of the sealant to compression and extension during movement cycles. Because of the special test joint configuration, the sealant is exposed to variable extension and compression amplitudes along the joint axis, allowing an evaluation of the effect of different movement amplitudes on the sealant when taking weatherability considerations into account. The results of the initial evaluations indicate that the test methods are capable of differentiating between products with regard to their resistance to accelerated or outdoor weathering and mechanical cycling. The type of failure and the changes in surface appearance observed during the test regimes are similar to those observed in actual service conditions. It is hoped that exposure studies based on these two new RTR methods will provide the underpinnings for the development of future ISO and ASTM durability test standards for building sealants. © 2008 RILEM.