Abstract
The Fenton heterogeneous process in a fluidized bed reactor using Zero Valent Iron (ZVI), in the metallic state, for the treatment of textile wastewater has been used an analyzed. The aim of this work was to optimize the following operating parameters: initial dye concentration, H2O2 concentration, pH, amount of ZVI, and UV radiation, for the removal of dye and organic matter. At first, a fractional factorial experimental design allows defining the most influential factors. After that, they were optimized using the Response Surface Methodology coupled to the Box-Behnken experimental design. The optimal conditions were found to be as follows: initial dye concentration, 881 mg/L; pH 5; ZVI concentration, 5,31 g/L; H2O2 concentration, 0,86 mL/L. At these conditions, the degradation kinetics was performed, reaching 100% and 80,83% of dye and chemical oxygen demand respectively, in 150 minutes of reaction.
Author supplied keywords
Cite
CITATION STYLE
Gilpavas, E., Medina, J., Dobrosz-Gómez, I., & Gómez, M. (2016). Degradación de Colorante Amarillo 12 de Aguas Residuales Industriales utilizando Hierro Cero Valente, Peróxido de Hidrógeno y Radiación Ultravioleta. Informacion Tecnologica, 27(3), 23–34. https://doi.org/10.4067/S0718-07642016000300004
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.