Predictive models of lumbar loadings when handling boxes

Abstract

Back problems resulting from the compression forces on the intervertebral disks during manual material-handling tasks are an important problem affecting workers in various industries. The quantification of these forces using intradiscal pressure or biomechanical modeling is complex, time consuming, and costly, and these methods cannot be readily used in the workplace to estimate loadings on the lower back. The objective of this study was to develop a predictive model that would allow the estimation of lumbar loadings for lifting and lowering boxes using easily measured anthropometric variables and variables related to the task. A dynamic and planar segmental model and a model of internal forces at L5/S1 were used to determine the compression forces on the lower back. Two predictive models, a field model and a laboratory model, were developed to estimate the compression forces when lifting or lowering 3.3 kg to 22.0 kg boxes between heights of 15 cm and 185 cm. Both models were validated by an examination of the residuals. Their predictive performance was also compared, with the laboratory model offering a slightly better prediction than the field model. Thus, these equations represent a practical tool for a better planning of handling tasks in the working environment with the purpose of reducing the back injuries of workers. © 1995 Taylor & Francis Group, LLC.