Implementing BIM and Finite Element Analysis in a Structural Integrity Investigation of Curtain Walls

Abstract

Evaluating the structural integrity of curtain walls during the life cycle of a building project can assist architects in developing better designs, help contractors establish better installation methods, and allow facility managers make informed maintenance decisions. This paper presents an effort to develop a process which combines three types of technologies: 3D laser scanning, Building Information Modeling (BIM), and Finite Element Analysis (FEA), to evaluate the structural integrity of a curtain wall. In a case study, a 3D laser scanner was used to scan the curtain wall, the resulting set of point clouds was used to create an actual as-built BIM model. This “as-is” BIM model is different than a construction as-built BIM model in that the former model captures existing deformations developed during construction, installation, and maintenance phases. Then further analysis was completed using simulation with FEA using the BIM model to potentially predict any future structural issues. Wind loads on the building façade and their effect on unintentional stresses built into the glass panel were studied. The final results inform of deformities in the curtain wall and show the amount of wind load the structure can support before there is a risk of structural damage. The contribution of this study is that the harmonious three-step technique quickens the entire process of identifying the risks to a building element. An additional use for these common software packages would be beneficial to all the stakeholders involved in the life cycle of the building, especially those concerned with the facilities management and the building life cycle.