Photocatalytic degradation of humic acid by Fe-TiO2 supported on spherical activated carbon with enhanced activity

12Citations
Citations of this article
13Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Fe-TiO2 supported on spherical activated carbon (Fe-TiO 2/SAC) with different Fe contents was prepared by heat treatment process after ion exchange method. The prepared Fe-TiO2/SAC was characterized by SEM, EDS, and BET. Batch experiments for photocatalytic degradation of humic acid by Fe-TiO2/SAC were carried out in the fluidized bed photoreactor. It was found that 0 wt% Fe-TiO2/SAC had high photocatalytic activity in the wavelength range of 100280 nm. However, Fe-TiO2/SAC with Fe contents of 0.4, 0.6, and 0.8 wt% exhibited higher photocatalytic activity than 0 wt% Fe-TiO2/SAC in the wavelength range of 315400 nm compared to that of 100280 nm. The optimum Fe content was 0.6 wt% for maximum photocatalytic degradation of humic acid. Moreover, Fe-TiO2/SAC does not require an additional process step for separation of photocatalyst from treated water after photocatalysis. © 2013 Mi-Hwa Baek et al.

Cite

CITATION STYLE

APA

Baek, M. H., Hong, J. S., Yoon, J. W., & Suh, J. K. (2013). Photocatalytic degradation of humic acid by Fe-TiO2 supported on spherical activated carbon with enhanced activity. International Journal of Photoenergy, 2013. https://doi.org/10.1155/2013/296821

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free