Phenol degradation by fenton reaction in air injection using plasma electrolysis method

4Citations
Citations of this article
11Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Phenolic compounds are pollutants which have high toxicity and could be harmful to the environment even at low concentrations. The degradation of phenolic has been conducted by various methods including photocatalytic and ozonation. However, these methods require high costs and large energy. Therefore, plasma electrolysis by the Fenton reaction may be an alternative method for phenol degradation. The purpose of this study is to determine the optimum conditions for phenol degradation by adding Fe2+ ions. The result shows that the most effective phenol degradation was obtained by using an optimum power of 700 watts with an air injection flow rate of 0.2 L/min and addition Fe2+ 20 ppm ions for 30 min experiments. Based on these conditions, the concentration of phenol in waste was reduced to 0.425 mg/L and the highest percentage of phenol degradation (99.58%) was observed. The final phenol concentrations obtained in this study met the quality standards for clean water at a concentration of 1 mg/L as well as the quality standards for drinking water treatment at a concentration of 0.5 mg/L.

Cite

CITATION STYLE

APA

Wahono, J. Z., Yusharyahya, R. D., Harianingsih, & Saksono, N. (2020). Phenol degradation by fenton reaction in air injection using plasma electrolysis method. In IOP Conference Series: Materials Science and Engineering (Vol. 980). IOP Publishing Ltd. https://doi.org/10.1088/1757-899X/980/1/012051

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free