Photocatalytic Oxidation of Trichloroethylene in Water Using a Porous Ball of Nano-ZnO and Nanoclay Composite

Abstract

The presence of nondegradable organic compounds and xenobiotic chemicals in water is a great concern for the general public because of their polar properties and toxicity. For instance, trichloroethylene (TCE) is a widely used solvent in the chemical industry, and it is also a contaminant of soil, surface water, and groundwater. Recent studies on new treatment technologies have shown that photocatalyst-based advanced oxidation processes are appropriate for removing these polar and toxic compounds from water. The objective of this study was to remove TCE from water using novel nano-ZnO-laponite porous balls prepared from photocatalyst ZnO with nanoscale laponite. These nano-ZnO-laponite porous balls have a porosity of approximately 20%. A lower initial concentration of TCE resulted in high removal efficiency. Moreover, the removal efficiency increased with increasing pH in the photocatalytic degradation experiments employing UVC light with nano-ZnO-laponite. The optimal dosage of nano-ZnO-laponite was 30 g and the use of UVC light resulted in a higher removal efficiency than that achieved with UVA light. In addition, the removal efficiency of TCE significantly increased with increasing light intensity. We think that TCE's removal in water by using porous ball of nano-ZnO and nanoclay composite is a result of degradation from hydroxide by photons of nano-ZnO and physical absorption in nanoclay.