Treatment of old landfill leachate with high ammonium content using aerobic granular sludge

Abstract

Background: Aerobic granular sludge has become an attractive alternative to the conventional activated sludge due to its high settling velocity, compact structure, and higher tolerance to toxic substances and adverse conditions. Aerobic granular sludge process has been studied intensively in the treatment of municipal and industrial wastewater. However, information on leachate treatment using aerobic granular sludge is very limited. Methods: This study investigated the treatment performance of old landfill leachate with different levels of ammonium using two aerobic sequencing batch reactors (SBR): an activated sludge SBR (ASBR) and a granular sludge SBR (GSBR). Aerobic granules were successfully developed using old leachate with low ammonium concentration (136mg L-1NH4+-N). Results: The GSBR obtained a stable chemical oxygen demand (COD) removal of 70% after 15days of operation; while the ASBR required a start-up of at least 30days and obtained unstable COD removal varying from 38 to 70%. Ammonium concentration was gradually increased in both reactors. Increasing influent ammonium concentration to 225mg L-1N, the GSBR removed 73±8% of COD; while COD removal of the ASBR was 59±9%. The GSBR was also more efficient than the ASBR for nitrogen removal. The granular sludge could adapt to the increasing concentrations of ammonium, achieving 95±7% removal efficiency at a maximum influent concentration of 465mg L-1N. Ammonium removal of 96±5% was obtained by the ASBR when it was fed with a maximum of 217mg L-1NH4+-N. However, the ASBR was partially inhibited by free-ammonia and nitrite accumulation rate increased up to 85%. Free-nitrous acid and the low biodegradability of organic carbon were likely the main factors affecting phosphorus removal. Conclusion: The results from this research suggested that aerobic granular sludge have advantage over activated sludge in leachate treatment.