Heterogeneous catalysts using strontium oxide agglomerates depositing upon titanium plate for enhancing biodiesel production

Abstract

Strontium oxide (SrO) is an effective catalyst for transesterification. SrO powder that is firmly deposited onto a light titanium plate (TiO2_P), denoted as SrO/TiO2_P, can be reinforced by forming strontium titanate (SrTiO3 ) at the interface. Exposed SrO agglomerates can promote subsequent continuous transesterification process. In this work, conversion efficiency and production of biodiesel from olive oil on SrO/TiO2_P is investigated. The as-designed SrO/TiO2_P was followed by dip-coating and heat treatment. The physical properties of SrO/TiO2_P were verified through ASTM D3359; the chemical structures before and after transesterification, were respectively identified by X-ray photoelectron spectroscopy and Raman spectroscopy. A focused microwave heating system was utilized for transesterification. In the optimized sample SrO/TiO2_P (x) (x = 0.5 M), SrO firmly bonds with TiO2_P and forms the SrTiO3 structure. With the support of TiO2_P, the tested oil with SrO agglomerates subsequently reacts with SrO under microwave heating. The biodiesel conversion rate reaches 87.7% after a reaction time of 4 min, while the biodiesel product has an average of 39.37 MJ/kg of combustion heat and less than 1 vol% of water content. The as-designed SrO/TiO2_P (0.5) thus has great potential for biodiesel production and is promising with high stability in particular for a continuous fluid flow system.