The Effects of Combined Treatments of Laser Engraving, Plasma Spraying and Resin Pre-Coating on Improving the Bonding Strength of Titanium Alloy and Carbon Fiber-Reinforced Polymer

Abstract

This study focused on effective methods of laser engraving treatment (LET), plasma spraying, and resin pre-coating (RPC) to manufacture the reinforced adhesive joints of titanium alloy and carbon fiber-reinforced polymer (TA-CFRP) composites. The combined treatments contributed to the creation of a better adhesive bonding condition and offer a vertical gap between circular protrusions to form epoxy pins and carbon nanotube (CNT)-reinforced epoxy pins. The bonding strength of the TA-CFRP composite was reinforced by 130.6% via treatments with a twice-engraving unit of 0.8 mm, plasma spraying, and RPC. The original debonding failure on the TA surface was changed into the cohesive failure of the epoxy adhesive and delamination-dominated failure of the CFRP panel. Overall, laser engraving has been confirmed as an effective and controllable treatment method to reinforce the bonding strength of the TA-CFRP joint combined with plasma spraying and RPC. It may be considered as an alternative in industry for manufacturing high-performance metal–CFRP composites.