Effects of V/III ratio on the growth of a-plane GaN films

5Citations
Citations of this article
26Readers
Mendeley users who have this article in their library.

Abstract

The non-polar a-plane GaN is grown on an r-plane sapphire substrate directly without a buffer layer by metal-organic chemical vapour deposition and the effects of V/III ratio growth conditions are investigated. Atomic force microscopy results show that triangular pits are formed at a relatively high V/III ratio, while a relatively low V/III ratio can enhance the lateral growth rate along the c-axis direction. The higher V/III ratio leads to a high density of pits in comparison with the lower V/III ratio. The surface morphology is improved greatly by using a low V/III ratio of 500 and the roughness mean square of the surface is only 3.9 nm. The high resolution X-ray diffraction characterized crystal structural results show that the rocking curve full width at half maximum along the m axis decreases from 0.757° to 0.720°, while along the c axis increases from 0.220° to 0.251° with the V/III increasing from 500 μmol/min to 2000 μmol/min, which indicates that a relatively low V/III ratio is conducible to the c-axis growth of a-plane GaN. © 2011 Chinese Physical Society and IOP Publishing Ltd.

Cite

CITATION STYLE

APA

Xie, Z. L., Li, Y., Liu, B., Zhang, R., Xiu, X. Q., Chen, P., & Zheng, Y. L. (2011). Effects of V/III ratio on the growth of a-plane GaN films. Chinese Physics B, 20(10). https://doi.org/10.1088/1674-1056/20/10/106801

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free