3D-Printed Reactor for Coupling Photoelectrochemical (Sea)Water Splitting with Solid-State H2 Storage

Abstract

The modular photoelectrochemical (PEC) reactor accommodating eight photoelectrodes with a total active area of up to 46 cm2 has been designed and manufactured using the fused deposition modeling method. The device was equipped with an electrolyte flow system, a relay module for the photoelectrode connection, and a feedback-loop module for switching between counter electrodes. The performance and durability of the system were tested within three case study experiments. The water splitting process was successfully combined with an in situ hydrogen storage in the form of metal hydride phases (confirmed by powder X-ray diffraction) using Fe2O3- or WO3-based photoanodes and LaNi5-based cathodes. The PEC water oxidation at the anodes was realized either in a strongly alkaline electrolyte (pH > 13.5) or in acidified synthetic seawater (pH < 2) for Fe2O3 and WO3 electrodes, respectively. In the latter case, the photoresponse of the anodes decreased the cell charging voltage by 1.7 V at the current density of 60 mA∙g−1. When the seawater was used as an anolyte, the oxygen evolution reaction was accompanied by the chlorine evolution reaction. The manufactured PEC-metal hydride reactor revealed mechanical and chemical stability during a prolonged operation over 300 h and in the broad range of pH values.