Assessment of Asphalt Mixtures Enhanced with Styrene–Butadiene–Styrene and Polyvinyl Chloride Through Rheological, Physical, Microscopic, and Workability Analyses

Abstract

This study investigates the performance improvement of asphalt binders through the incorporation of two polymers, polyvinyl chloride (PVC) and styrene–butadiene–styrene (SBS), with asphalt grade (60–70), to address the growing demand for durable and climate-resilient pavement materials, particularly in areas exposed to high temperatures like Iraq. The main objective is to improve the mechanical characteristics, thermal stability, and workability of typical asphalt mixtures to extend pavement lifespan and lessen maintenance costs. A thorough set of rheological, physical, morphological, and workability tests was performed on asphalt binders modified with varying content of PVC (3%, 5%, 7%, and 9%) and SBS (3%, 4%, and 5%). The significance of this research lies in optimizing binder formulations to enhance resistance to deformation and failure modes such as rutting and thermal cracking, which are common in extreme climates. The results indicate that PVC enhances performance grade (PG), softening point, and viscosity, although higher contents (7% and 9%) exceeded penetration grade specifications. SBS-modified binders demonstrated marked improvements in softening point, viscosity, and rutting resistance, with PG values increasing from PG64-x (unmodified) to PG82-x at 5% SBS. Fluorescence microscopy confirmed optimal polymer dispersion at 5% concentration for both SBS and PVC, ensuring compatibility with the base asphalt. Workability testing revealed that SBS-modified mixtures exhibited higher torque requirements, indicating reduced workability compared to both PVC-modified and unmodified binders. These findings offer valuable insights for the design of high-performance asphalt mixtures suitable for hot-climate applications and contribute to the development of more durable and cost-effective road infrastructure.