SIMS/XPS studies of surface layer formed in Fe-Si-Mn alloys by oxygen penetration

8Citations
Citations of this article
5Readers
Mendeley users who have this article in their library.

Abstract

Secondary ion mass spectrometry (SIMS) and X-ray photoelectron spectroscopy (XPS) have been used for analyzing surface layers formed in Fe-Si-Mn alloys containing 1, 2, 3 and 4.5 mass% silicon, which were annealed in hydrogen and argon gases with a low partial pressure of oxygen. SIMS depth profiles showed that silicon in these alloys is reacted with oxygen penetrating into the bulk to form silicon oxides, and the characteristic distribution of silicon oxides is obtained the surface layer, depending on the bulk silicon concentration. Manganese in the alloys was also found to be enriched to the outer side of the surface layer. On the other hand, XPS results showed that silicon and manganese are enriched on the top surface in these alloys, and the surface concentration of these elements depends on the bulk silicon concentration.

Cite

CITATION STYLE

APA

Suzuki, S., Hasegawa, H., Mizoguchi, S., & Waseda, Y. (2003). SIMS/XPS studies of surface layer formed in Fe-Si-Mn alloys by oxygen penetration. ISIJ International, 43(1), 71–76. https://doi.org/10.2355/isijinternational.43.71

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free