Simulation Study of High Sensitivity Fiber SPR Temperature Sensor with Liquid Filling

Abstract

In this paper, a high sensitivity fiber temperature sensor based on surface plasmon resonance is designed and studied. In the simulation, the single mode fiber is polished to remove most of the cladding, and then gold and silver films are added. Finally, it is embedded in the heat shrinkable tube filled with a thermo-optic coefficient liquid for curing. The numerical simulation results show that the sensing characteristics are sensitive to the remaining cladding thickness of the fiber, the thickness of the gold film and the thickness of the silver film. When the thermo-optic coefficient of the filling liquid is −2.8 × 10−4/°C, the thickness of the gold film, the thickness of the silver film and the thickness of the remaining cladding of the fiber are 30 nm, 20 nm and 1 μm, respectively. The sensitivity of the sensor designed in this paper can reach −6 nm/°C; this result is slightly higher than that of similar research in recent years. It will have a promising application prospect in flexible wearable temperature sensors, smart cities and other fields.