Magnetron sputtering combines a glow discharge with sputtering from a target that simultaneously serves as a cathode for the discharge. The electrons of the discharge are confined between overarching magnetic field lines and the negatively biased cathode. As the target erodes during the sputter process, the magnetic field strengthens in the cathode vicinity, which can influence discharge parameters with the risk of impairing reproducibility of the deposition process over time. This is of particular concern for high-power impulse magnetron sputtering (HiPIMS) as the discharge current and voltage waveforms vary strongly with the magnetic field strength. We here discuss ways to limit the detrimental effect of target erosion on the film deposition process by choosing an appropriate mode of operation for the discharge. The goal is to limit variations of two principal flux parameters, the deposition rate and the ionized flux fraction. As an outcome of the discussion, we recommend operating HiPIMS discharges by maintaining the peak discharge current constant.
CITATION STYLE
Rudolph, M., Brenning, N., Hajihoseini, H., Raadu, M. A., Fischer, J., Gudmundsson, J. T., & Lundin, D. (2022). Operating modes and target erosion in high power impulse magnetron sputtering. Journal of Vacuum Science & Technology A, 40(4). https://doi.org/10.1116/6.0001919
Mendeley helps you to discover research relevant for your work.