Integration of microwave co-torrefaction with helical lift for pellet fuel production

Abstract

The heating performance of empty fruit bunch pellets (EFBPs) has been limited by its low energy density, high moisture, and ash content. Hence, microwave co-torrefaction (MCT) was performed with microwave heating unto waste oil mixed EFBP to produce high-energy biofuel. However, the non-homogeneous electromagnetic fields distribution in the microwave cavity results in an uneven heating behavior, producing the hot and cold spots. Hence, MCT coupled with helical lift was examined for its potential to improve heat distribution. The effect of temperature and types of waste oil on the proximate analysis and surface properties were studied. In comparison to the conventional torrefaction using a furnace (>30 min), MCT provided rapid heating (50-80°C·min-1) and a shorter process time (10 min). The use of helical lift with 2-dimensional movement - rotational (24 rpm·min-1) and vertical motion (5 cm·min-1) simultaneously, distributed microwave radiation uniformly for rapid heating. The proximate analysis demonstrated that the ash content was reduced from 8 to 3 wt%, and the highest fuel ratio of 2.0 was achieved. Additionally, the highly porous structure of EFBP biochar can act as an activated carbon precursor. MCT coupled with helical lift represents a promising approach to prevent hot spots during microwave heating.