Effect of CO2 Phase on Pore Geometry of Saline Reservoir Rock

7Citations
Citations of this article
15Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

The phase of CO2 present in a saline reservoir influences the change of the pore geometry properties of reservoir rocks and consequently the transport and storage integrity of the reservoir. In this study, digital rock physics was used to evaluate pore geometry properties of rocks saturated with the different phaseCO2-brine under reservoir conditions. The changes in the pore geometry properties due to the different phaseCO2-brine-rock interaction were quantified. In addition to compression, CO2-brine-rock interaction caused a further reduction in porosity by precipitation. Compared to the dry sample, the porosity of the gaseous CO2-br sample was reduced the most, and was lower by 15% after saturation and compression. There was reduction in the pre-compression porosity after compression for all the samples, however, the reduction was highest in the gaseous CO2-br-saturated sample (13%). The flatness of pore surfaces was reduced, and pores became less rounded after compression, especially in supercritical CO2-br-saturated rock. The results from this research provide a valuable input to guide a robust simulation of CO2 storage in reservoir rocks where different phases of CO2 could be present.

Cite

CITATION STYLE

APA

Peter, A., Jin, X., Fan, X., Eshiet, K. I. I., Sheng, Y., & Yang, D. (2022). Effect of CO2 Phase on Pore Geometry of Saline Reservoir Rock. Rock Mechanics and Rock Engineering, 55(4), 1907–1930. https://doi.org/10.1007/s00603-021-02658-x

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free