Enhanced fixed-bed column adsorption using a ternary MgO-impregnated eggshell–kaolin composite: Toward an efficient and sustainable fluoride removal technology

Abstract

In this study, a ternary MgO-impregnated eggshell–kaolin (EKM) composite was synthesized and evaluated for fluoride removal from water under fixed-bed column adsorption. The composite, prepared by co-precipitation and wet impregnation, was characterized using XRD, FTIR, SEM–EDX, and Brunauer–Emmet–Teller analyses. Results confirmed successful integration of the three components, yielding a mesoporous structure with a surface area of 158.5 m2 g−1. The composite exhibited good defluoridation performance under varying operational conditions. Higher bed depth and lower flow rate enhanced adsorption capacity, achieving up to 6.35 mg g−1 at 10 mg L−1 influent fluoride concentration. Breakthrough data were well described by the Thomas, Clark, and Yoon–Nelson models (R2≥0.94[jls-end-space/]) at lower influent concentration, moderate flow rate, and greater bed depth, while the bed depth service time model confirmed a linear increase in service time with bed depth. The adsorbent maintained good regeneration ability across four cycles. Co-existing anions showed interference with the uptake of F−[jls-end-space/], with inhibitory effects following the order: PO43−>SO42−>NO3−>Cl−[jls-end-space/]. The study estimated that 11.11 g of EKM composite yields 2 L of safe water for less than USD1. These results highlight the EKM composite as an efficient and sustainable adsorbent for practical defluoridation applications.