Effects of the multicavity tip coolant injection on the blade tip and the over tip casing aerothermal performance in a high-pressure turbine cascade

Abstract

In high performance gas turbine engines, the over tip leakage flow driven by the lateral pressure gradient is inevitably induced inside the blade tip gap in the high-pressure stage turbine due to the freestanding airfoil design methodology. To obtain an increasing level of thermal efficiency, the turbine inlet temperature is gradually increased in terms of the Brayton cycle. Hence, the blade tip and the over tip casing are subjected to high thermal load. In real turbine blade, cavity tips are widely used to decrease the over tip leakage flow and the thermal load on the blade tip and over tip casing. In the present study, the numerical simulations were conducted to investigate the effects of the multicavity coolant injection on the blade tip and the over tip casing aerothermal performance. Three-dimensional (3-D) Reynolds-averaged Navier–Stokes (RANS) equations and standard (Formula presented.) turbulence model were solved together in the simulations. The results indicate the ribs inside the tip cavity alter the distribution of film cooling efficiency by changing flow structure within the tip gap. Most of the coolant is limited in each little cavity owing to the blockage of ribs. Here, the swirling action of each cavity vortex results in the coolant providing a wider film cooling coverage. Therefore, the increase in film cooling effectiveness on the blade tip surface is more efficient than that of over-tip casing. The blade with four tip cavities film cooling (4CFC) obtains the largest area-averaged film cooling effectiveness, which is augmented by 14.3% in comparison with the case with a single tip cavity film cooling (1CFC).